TC66N-585 production-batch evidence review
TC66N-585 585W N-Type i-TOPCon Dual-Glass Module
The TC66N-585 catalogue record describes a 585 W, 21.7% efficient N-type i-TOPCon bifacial dual-glass module with 132 half-cells. Its STC table lists 39.5 V Vmpp, 14.82 A Impp, 47.5 V Voc and 15.52 A Isc. The module is shown as 2382 × 1134 × 30 mm and 33.7 kg with 2.0 + 2.0 mm glass, a 30 A series-fuse rating and 720-unit reference 40 ft HQ loading. The high-current string design, mechanical load, exact BOM, connector/cable and released certificates remain production-batch approvals.
Current source identity: TC66N-585 internal single-bin catalogue record; no manufacturer-released datasheet, full production suffix or certificate package is attached.
Current Source Specification Tables
These tables reproduce the current catalogue or attached datasheet record. Confirm the exact model identity, production revision and destination-specific documents before order release.
Electrical Characteristics (STC)
| Model | TC66N-585 |
|---|---|
| Maximum power (Pmax) | 585 W |
| Maximum power voltage (Vmpp) | 39.5 V |
| Maximum power current (Impp) | 14.82 A |
| Open-circuit voltage (Voc) | 47.5 V |
| Short-circuit current (Isc) | 15.52 A |
| Module efficiency | 21.7% |
| Power tolerance | 0 to +5 W |
| Bifaciality | 80% ± 5% |
| STC | 1000 W/m², 25°C cell temperature, AM 1.5 |
Mechanical Characteristics
| Cell technology | N-type i-TOPCon monocrystalline, bifacial dual-glass |
|---|---|
| Cell configuration | 132 half-cells |
| Module dimensions | 2382 × 1134 × 30 mm |
| Weight | 33.7 kg |
| Front / rear glass | 2.0 mm heat-strengthened glass / 2.0 mm heat-strengthened glass |
| Frame | Anodized aluminium alloy |
| Junction box | IP68 |
| Connector | MC4-compatible; final connector subject to approved datasheet |
Operating Conditions
| Operating temperature | -40°C to +85°C |
|---|---|
| Maximum system voltage | 1500 V DC |
| Maximum series fuse rating | 30 A |
| Nominal operating cell temperature | 43°C ± 2°C |
| Temperature coefficient of Pmax | -0.29% / °C |
| Temperature coefficient of Voc | -0.24% / °C |
| Temperature coefficient of Isc | +0.04% / °C |
| Mechanical load | Refer to the approved production-batch datasheet |
Packing Configuration
| Reference packing | 36 modules / pallet; 720 modules / 40 ft HQ |
|---|---|
| Packing note | Confirm loading quantity and pallet dimensions before booking |
Current document status
Request the approved TC66N-585 factory datasheet/nameplate, full BOM, per-model IEC certificate/report set, mechanical-load and fire/PID evidence, connector/cable specification, warranty, flash/EL criteria, packing drawing and traceability plan.
Current TC66N-585 evidence
Preserve the exact 585 W electrical and mechanical identity
The 585 W record must not inherit the current, size or packing values of other TC66N products.
585 W STC row
The table lists 585 W, 39.5 V Vmpp, 14.82 A Impp, 47.5 V Voc, 15.52 A Isc, 21.7% efficiency and 0 to +5 W tolerance.
Temperature labels
Pmax -0.29%/°C, Voc -0.24%/°C, Isc +0.04%/°C and 43°C ± 2°C NOCT are shown; no separate NOCT electrical-output row is supplied.
Commercial-format mechanics
132 half-cells, 2382 × 1134 × 30 mm, 33.7 kg, 2.0 + 2.0 mm glass, anodized frame and IP68 junction box are displayed.
Batch-dependent fields
Exact connector maker/model, cable length, cell/BOM code, glass/encapsulant supplier, clamp zones, load values and certification scope are absent.
TC66N-585 procurement checks
Six checks for C&I roof and fixed-tilt string design
The 15.52 A Isc, long module format and project mounting conditions require explicit verification.
Production identity
Freeze manufacturer, full suffix, factory, cell/BOM, glass, frame, junction box, connector/cable and nameplate revision.
Inverter current
Check 14.82 A Impp and 15.52 A Isc with all code/design factors against connector, cable, series fuse and inverter per-input/per-MPPT limits.
String voltage
Use 47.5 V Voc and -0.24%/°C with site minimum temperature; verify MPPT/start/rated voltage across expected operating temperature.
Handling and mounting
Confirm 2382 mm length, 33.7 kg weight, crew/lifting plan, clamp zones, rail/tracker compatibility and project wind/snow calculations.
Bifacial and rear-side design
Confirm rear construction and model albedo, row height/spacing, rear shading, torque tube/rail effects and soiling; do not convert bifaciality directly to yield.
Evidence and packing
Request load/fire/PID and IEC files, warranty, flash/EL, serial traceability, 36-per-pallet/720-per-container drawing, container mass and delivery terms.
Current, mechanics and evidence boundaries
A 585 W label does not prove string compatibility or rooftop suitability
Electrical and structural approval depends on the exact module revision and project design.
High current must match the inverter
Module power alone is insufficient; verify Imp/Isc, design factors, strings per MPPT, connector/cable and fuse/current limits.
Large format changes handling
Dimensions and weight affect manual handling, roof access, clamp loads, rail span, uplift and installation productivity.
No mechanical-load number is currently approved
The internal table refers to a future approved batch datasheet. Require test basis and project structural calculations.
Certificate labels need model coverage
Do not accept series-level logos or statements without the exact manufacturer/factory, TC66N-585 suffix, standard edition and report scope.
Continue the TC66N-585 review
Check the module table against C&I procurement evidence
Use these guides for datasheet interpretation and certificate matching.
TOPCon module checklist for C&I projects
Review current, structure, mounting, documents, packing and project responsibilities for commercial arrays.
Review TOPCon checks →Solar certificate verification guide
Confirm model and suffix coverage, applicant/factory, standards, editions, reports and destination acceptance.
Verify module documents →TC66N-585 FAQ
Questions to close before string and batch approval
The 585 W bin must remain tied to its own electrical and mechanical record.
Can TC66N-585 use the same string design as a lower-current module?
Not automatically. Check 14.82 A Impp and 15.52 A Isc plus design factors against every connector, cable, fuse and inverter input/MPPT limit.
Is the listed 585 W expected in field operation?
585 W is an STC rating. Field power changes with irradiance, cell temperature, spectrum, mismatch, soiling, bifacial conditions and system losses.
Are roof load and clamp zones confirmed?
No. The current record has no numeric mechanical-load or clamp-zone document. Obtain the approved datasheet/installation manual and complete project structural design.
What should be fixed before shipment?
Freeze the full suffix/BOM, flash distribution, certificates, warranty, connector/cable, pallet drawing, serial traceability, inspection criteria and container plan.
Prepare a TC66N-585 project RFQ
Send module/string and inverter data, roof or fixed-tilt layout, loads, mounting method, destination documents, connector/cable and packing requirements.
Start with the product, application or project information you have. We can help identify the remaining configuration, document or delivery questions before a final quotation.
Verify TC66N-585 EvidenceRelated Products
TC54N-430 TOPCon Solar Module
Representative N-type TOPCon sourcing configuration for residential rooftops and space-constrained commercial roofs. Final electrical label, bill of materials, certification scope, packing, and delivery configuration must be confirmed against the selected production batch before purchase.
TC54N-455 TOPCon Solar Module
Representative N-type TOPCon sourcing configuration for high-efficiency residential and light-commercial rooftops. Final electrical label, bill of materials, certification scope, packing, and delivery configuration must be confirmed against the selected production batch before purchase.
TC72N-550 TOPCon Solar Module
Representative N-type TOPCon sourcing configuration for commercial rooftops and distributed ground-mount projects. Final electrical label, bill of materials, certification scope, packing, and delivery configuration must be confirmed against the selected production batch before purchase.